9000+ Cashless Garages
96% Claims Settled (FY 23-24)


How to Remove Mould from Your Car Interior?

Mould in the car's interior is not only a major health hazard but also very unpleasant to look at. However, getting rid of it is not as hard as you may think. With a few simple steps, you can clean and restore your car to its original, fresh, and safe state.
In this article, we will guide you on how to identify, effectively remove, and prevent mould in your car. Read this guide and keep your car spotlessly clean and protected against mould.
Table of Contents
What is a Car Mould?
Car mould is a fungus that thrives well in warm, damp locations. In most cases, this fungus can appear on car seats, carpets, and occasionally on the underside of a car seat. The patches or spots become dark, though they can be dangerous if not dealt with properly.
Mould can grow inside a car if water enters it through rain, the spilling of liquids, or high humidity. If these moistures do not dry for some time, it leads to the rapid spread of moulds. This can cause damage to your car's interior and also pose a health risk
Importance of Maintaining a Clean Car Interior
Maintaining clean, mould-free upholstery inside a vehicle is essential for the health, hygiene, and durability of the vehicle. Moulds and fungi are microorganisms that thrive in moist environments, often as a result of spills, leaks, or humidity, and release spores that contaminate the air and cause allergies, asthma, and health-related respiratory problems.
Failure to control the vehicle's environment allows these microorganisms to degrade upholstery, carpets, and leather, resulting in irreversible staining, rancid odours, and physical deterioration that detracts from the vehicle's resale value.
Regular cleaning of the vehicle helps control or even eliminate potential areas where microbes can grow. Taking proactive measures or hiring a professional cleaning service can help maintain a clean, healthy, and comfortable environment for its passengers.
How to Remove Mould From Your Car?
By following the steps below, you can easily remove the mould from your car's interior and prevent future growth, keeping your car clean and healthy:
Step 1: Remove All Noticeable Mould
Start by vacuuming the area with a filter vacuum to suck out any loose mould spores. It is essential not to spread spores throughout the car while cleaning and to prevent them from being pushed into the upholstery or surfaces. Vacuuming also makes cleaning much more efficient and easier.
Step 2: Use a Mould Remover or Vinegar Solution
Spray the affected areas with white vinegar and water and leave it for a few minutes before scrubbing. White vinegar is a natural mould killer that does not employ harsh chemicals; thus, it is also safe for your car and the environment. It neutralises odours; hence, the car smells fresh while killing the mould.
Step 3: Scrubbing And Wipe Cleaning
Using a scrub brush, gently scrub the mouldy areas, breaking them up and loosening them from the surface. Then, use a clean, damp cloth to wipe the surface, removing the mould residue. Scrubbing intently into fabric fibres will ensure you remove all traces of mould, stopping future regrowth.
Step 4: Dry the Area Thoroughly
Dry the cleaned areas thoroughly with a towel or microfiber cloth, as moisture is a key factor in mould growth. Correct drying prevents its return and removes excess moisture from upholstery or surfaces. The car must be left open afterwards to allow the moisture to evaporate. Additionally, you can park the car in the sunlight to accelerate the drying process.
Step 5: Add Mould Inhibitor
A mould inhibitor should be applied to prevent the surfaces from developing more mould. Mould inhibitors create a barrier that prevents moisture from reaching the surface, thus preventing mould growth on the surfaces. It also prevents re-infestation of mould within a car if applied at all times.
What are the Items Required for Cleaning Car Mould?
Mould in your car can be a destructive and health-hazardous factor. It can be easily eliminated by having the right instruments. Here is a guide on essential equipment to eliminate car mould:
HEPA Vacuum
These types of vacuum suck all the mould spores out of carpets and upholstery, etc., and then traps them in minimal size. It would stop the mould from becoming airborne and spreading throughout your car. Thereby ensuring your safety.
Scrub Brush
A medium-bristled scrub brush will help remove mould from fabrics and surfaces. It ensures that all the mould is scrubbed from the fibres and upholstery, leaving no remnants. This allows for deeper cleaning in tough-to-reach spots.
Vinegar or Mould Remover
White vinegar or a special mould cleaner kills the mould and neutralises the odour. It is a natural disinfectant and deodoriser. It is safe, eco-friendly, and effectively removes mould without harsh chemicals.
Microfiber Cloths
The softest and most absorbent grade microfiber cloth removes mould without leaving a trace for further growth. It does not harm the surface it is cleaned on, with no streaks or lint. It captures and removes the mould smoothly.
Rubber Gloves
Use rubber gloves to protect your hand when cleaning agents and touching the mould. They don't allow any exposure to the mould, dust or chemicals in the cleaning products to attack your skin. Thereby enhancing your safety.
How to Check for Mould in Your Car?
Hidden mould can be disastrous not only for human lives but also for car parts. Below are pointers concerning the danger posed by moulds and how they can be found:
Check Hidden Areas
Mould grows under seat bottoms, in footwells, and between the seam areas of upholstery, wherever dampness accumulates. Inspecting these areas and removing them prevents the dangers they pose.
Check the Carpets and Upholstery
Moulds thrive in damp fabrics, so check your car upholstery and carpets for any discoloured spots. The moulds grow and spread quickly. This ruins the fabric permanently and emits a musty odour
Smell for Musty Odours
A damp, musty smell in your car can be a sure sign of mould growth. If left unattended, it can lead to more severe infestation cases and poor air quality in your vehicle. It also lowers the safety of the car and its passengers.
Health Risks
Inhaling mould spores can cause allergic reactions, respiratory problems, and other diseases, such as asthma. So, controlling mould growth is necessary to prevent such health issues.
Air Vents and AC System
Mould can also develop in air vents and the AC system, where moisture accumulates. Mould spores in the air circulate throughout the car, causing health risks and spreading contamination.
What Health Problems Can Car Mould Cause?
Moulds can cause various health issues, especially if exposed for a long time, affecting most body parts. Here are some common health problems:
Respiratory Disorders
Mould spores may trigger asthma or other respiratory conditions. This leads to breathlessness, wheezing, and a chronic cough. Chronic exposure to the effects of mould may worsen such conditions with time.
Irritation to the Skin
If touched, mould causes rashes, itching, or irritation. Continued exposure worsens this condition. Exposure to the same mould several times causes skin infections or allergic reactions.
Weakened Immune System
Mould may weaken your immunity. This also makes it more challenging to fight various infections in the body. Gradually, it weakens the immunity, paving the way for other bacterial infections.
Headaches and Fatigue
Continuous fatigue and headaches can be caused by exposure to mould. Mould toxins affect the nervous system. This can cause fatigue, poor concentration, and frequent headaches that impair one's functioning.
Eye Irritation
The mould spores may irritate the eyes, leading to redness, itching, or even watery eyes. The enclosed space of a car aggravates these irritations. This can cause discomfort and may lead to more serious eye problems.
Sinus Problems
It would lead to sinus problems or sinusitis. Since one may be exposed to pressures and pain. Even one may find breathing through the nose impossible. They can persist or even lead to many infections or medical treatment.
When Should You Call a Professional for Car Mould?
Knowing the signs of extensive mould can save you time and prevent costly damage. Here is when to call a professional for car mould removal
Considerable Mould Growth
If mould covers a large area or has spread extensively, it's time to call a professional. They are well-equipped and have experience in handling infestations without causing further spread.
Persistent Musty Smell
A professional will trace and eliminate the hidden moulds. In this respect, a professional will ensure that all causes of the smell are traced and ultimately eliminated. Thus removing the health risks.
Severe Water Damage
If your car has been flooded or has a leak, the chances of mould spreading are very high. A professional will assess the level of damage and safely remove mould from all affected areas.
Hard-to-Reach Areas
Areas with mould growth behind panels or air vents are easier to clean up if proper equipment is involved. The professionals have the necessary equipment to access such regions and eliminate mould growth.
Recurrent Mould Growth
If mould grows back very often, then something must be out of order. This case can only be diagnosed by going through the nature of the problem, which a professional can assess
Toxic Mould Concern
If you suspect the presence of harmful moulds, such as black mould, call a professional immediately. Toxic mould is dangerous and poses grave health threats.
How to Prevent Mould Regrowth in Your Car?
Proper care and maintenance can help prevent mould from coming back. By following the given tips, you can effectively prevent mould regrowth:
Regular Cleaning and Drying
Ensure your car is cleaned regularly and consistently dried after exposure to moisture. Keeping your car dry and clean helps prevent mould from forming further.
Control Humidity
Use a dehumidifier or open windows slightly to allow for air circulation within the car. When humidity levels are low, it becomes difficult for mould to grow, keeping the vehicle clean and fresh.
Apply a Mould Inhibitor
Apply a mould inhibitor to your car's interior. Mould inhibitors form a protective barrier that prevents the growth of mould, offering long-term protection against moisture buildup.
Fix Leaks Immediately
Assess if the car has any leaks in the windows, doors, or the roof. This helps prevent moisture accumulation, which is considered one of the primary causes of mould growth.
Park in Dry Area
This is where most people do a good job of parking their vehicles in dry, ventilated areas. Moreover, keeping the car inside a covered garage will effectively discourage the growth of mould.
Apply Moisture Absorbers
Place silica-gel packs or activated charcoal in your car to reduce the amount of moisture that accumulates. Its use ensures that it maintains low moisture levels, which discourages the growth of moulds.
Clean Air Vents Frequently
Condensation can occur inside air vents if moisture is trapped within them. Clean your car's air ventilation system to keep the air flow as clear and mould-free as possible.
Replace Moist Upholstery
If carpets or upholstery remain damp for weeks, it's time to replace them. Stale, moist materials are most likely to promote mould and mildew. Changing them prevents the formation of damp or mould.
Removing mould is crucial both for the car's condition and your health. This can be ensured by proper cleaning and drying with the right product, which should remove all debris and prevent its re-emergence. Keeping the inside of your car clean and dry maintains the health and safety of the vehicle. Get professional help if needed.